Mono Amplifier

Power Up Your Sound
Designed for high performance and value, Alpine’s wide selection of sound system solutions provide powerful, high-quality sound for every vehicle.

Power up your system with Alpine’s V-Power amplifiers. These amps provide outstanding power output, flexibility and value with a bold, stylish design.

Features
* Terminal Layout: Two-Sided
* Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals

General
• Amplifier Type: Class-D (Digital) • Channel Design: 1 Channel (Mono) • Thermal Control: Thermal Management Control • Power Supply: DC-DC PWM Power Supply • Power Supply Design: MOSFET Power • Board Circuitry: STAR Circuitry • Current Protection: Over-Current, Over-Voltage and Thermal Protection • Power Indicator: Top Mounted Blue LED Power Indicator • RCA Output: Gold Plated RCA Input Connectors • Speaker Level Inputs • Crossover: Adjustable Low-Pass • Connector Plating: Gold Plated Input, Output, Power and Speaker Terminals • Board Design: Dual Sided Glass Epoxy PC Board • Gain Control: Continuously Adjustable Gain Control

Specifications
• Total Max Power: 1900W

RMS Power Ratings:
• Per channel into 4 Ohms: (@ 14.4V +-1%THD+N, 20Hz - 200Hz)
600W x 1
• Per channel into 2 Ohms: (@ 14.4V +-1%THD+N, 20Hz - 200Hz)
1000W x 1

Sound Tuning
• Crossover: 50Hz-200Hz, -24dB/oct. (Low-Pass)
• EQ (Equalizer): Bass EQ (Fixed Frequency): 50Hz 0 to +12dB
• Subsonic Filter: 15Hz (Fixed), -24dB/oct.

Dimensions
• Foot Print (WxHxD) mm: 380mm x 60mm x 242mm
• Heat Sink (WxHxD) mm: 320mm x 60mm x 242mm

General
• Power Requirements: 14.4V DC (11V to 16V)
• Input Sensitivity: 0.2 - 4.0V
• Frequency Response: 20 -200Hz (200Hz/-3dB)
• Speaker Impedance: 4 or 2 Ohms
• Signal to Noise: 100dBA

Features
• (SPK Connect) • 4Layer Glass Epoxy PC Board • Class-D • Layered Installation • 4/3/2 Channel Operation • Thermal Management Processor • Adjustable Crossover (HP/LP) • MOSFET Power Supply • DC-DC PWM Power Supply • MOSFET Final Outputs • STAR Circuitry • Auto Over-Current Protection • Top Mounted Blue LED Power/Status Indicator • Integrated Wire and Mounting Screw Terminals • Input Channel Selector • Input Mode Selector Switch • One Side Terminal Layout • Gold Plated RCA Input Connectors • Continuously Adjustable Gain Control • Gold Plated Power Screw Terminals • Dimensions: 257mm x 192mm x 62mm

RMS Power
• [2ohms @14.4V 1%THD]: 150W x 4
• [4ohms @14.4V 1%THD]: 150W x 4

Bass Engine® Sound Tuning
• Crossover Frequency Adjustment: 1/2Ch + 3/4Ch,
30Hz-400Hz HP/LP/Off
• (-12dB/oct)

Features
• 1 Channel Operation • BassEngine® • Subsonic Filter • Bass EQ Circuit • Crossover (LP) • MOSFET Power Supply • DC-DC PWM Power Supply • Discrete Pre-Amp Stage • Double Buffered Pre-Amp Input Circuitry • STAR Circuitry • Top Mounted Blue LED Power/Status Indicator • Continuously Adjustable Gain Control • Speaker Level Inputs • Gold Plated Power Screw Terminals

Gold Plated Speaker Terminals
• Cross-Vented Chassis Design

CEA-2006 Power Rating
• CEA-2006 Power Rating (40hm at 14.4V = 1%THD+N), S/N 60dBA (Ref. 1W into 4Ohm): 200x1

RMS Power (at 14.4V THD+N, 20Hz-200Hz)
• Per channel into 4 ohms: 200W x 1 (1.0% THD)
• Per channel into 2 ohms: 350W x 1 (1.0%)
• Total Max. Power: 700W

BassEngine® Sound Tuning
• Crossover Network: 18dB/oct
• Low Pass Crossover Frequency (Adjustable): 50Hz – 200 Hz
• Subsonic Filter (Fixed): 15Hz @ 24dB/oct.
• Bass EQ Frequency (Fixed): 50Hz
• Bass EQ Level (Adjustable): 0 - 12dB

General
• Power Requirements: 14.4V DC (11V to 16V)
• Frequency Response: 20Hz – 200kHz (+0, -3dB)
• Signal to Noise (S/N): 90dBA (referenced to rated power)
• Input Sensitivity (For Rated Power): 0.2V to 4.0V
• Input Impedance: 10k Ohm
• Speaker Impedance: 4 or 2 Ohm (Stereo)
• Dimensions (WxHxD): 199mm x 60mm x 267mm
• Dimensions (WxHxD): 7-4/5" x 2-2/5" x 10-1/2"
• Weight: 2.52 Kg. (5 lbs. 9 oz)

Features
• Terminal Layout: Two-Sided
• Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals

General
• Amplifier Type: Class-A/B • Channel Design: 4/3/2 Channel • Thermal Control: Thermal Management Control • Power Supply: DC-DC PWM Power Supply • Power Supply Design: MOSFET Power • Board Circuitry: STAR Circuitry • Current Protection: Over-Current, Over-Voltage and Thermal Protection • Power Indicator: Top Mounted Blue LED Power Indicator • RCA Output: Gold Plated RCA Input Connectors • Speaker Level Inputs • Crossover: Adjustable Low-Pass/High-Pass • Connector Plating: Gold Plated Input, Output, Power and Speaker Terminals • Pre-Amp Stage: Discrete • Final Outputs: Non-Fading Pre-Amp Output • Board Design: Dual Sided Glass Epoxy PC Board • Gain Control: Continuously Adjustable Gain Control

Specifications
• Total Max Power: 1320W

RMS Power Ratings
• Per channel into 4 Ohms: (@ 14.4V +-1%THD+N, 20Hz - 20kHz)
100W x 4
• Per channel into 2 Ohms: (@ 14.4V +-1%THD+N, 20Hz - 20kHz)
150W x 4
• Bridged into 4 Ohms: (@ 14.4V +-1%THD+N, 20Hz - 20kHz)
300W x 2

Sound Tuning
• Crossover: 50Hz-400Hz, -12dB/oct. (Low-Pass/High-Pass)
• EQ (Equalizer): Bass EQ (Fixed Frequency): 50Hz +12dB
• Subsonic Filter: 15Hz (Fixed), -18dB/oct.

Dimensions
• Foot Print (WxHxD) mm: 380mm x 60mm x 242mm
• Heat Sink (WxHxD) mm: 320mm x 60mm x 242mm

General
• Power Requirements: 14.4V DC (11V to 16V)
• Input Sensitivity: 0.2 - 4.0V
• Frequency Response: 20 -20kHz (0, -1dB)
• Speaker Impedance: 4 or 2 Ohms
• Signal to Noise: 100dBA

Features
• Terminal Layout: Two-Sided • Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals • Amplifier Type: Class-A/B • Channel Design: 4/3/2 Channel • Thermal Control: Thermal Management Control • Power Supply: DC-DC PWM Power Supply • Power Supply Design: MOSFET Power • Board Circuitry: STAR Circuitry • Current Protection: Over-Current, Over-Voltage and Thermal Protection • Power Indicator: Top Mounted Blue LED Power Indicator • RCA Output: Gold Plated RCA Input Connectors • Speaker-Level Inputs • Crossover: Adjustable Low-Pass/High-Pass • Connector Plating: Gold Plated Input, Output, Power and Speaker Terminals • Pre-Amp Stage: Discrete • Final Outputs: Non-Fading Pre-Amp Output • Board Design: Dual Sided Glass Epoxy PC Board • Continuously Adjustable Gain Control

Specifications
• Total Max Power: 640W

RMS Power Ratings
• Per channel into 4 Ohms: (@ 14.4V +-1%THD+N, 20Hz - 20kHz)
50W x 4
• Per channel into 2 Ohms: (@ 14.4V +-1%THD+N, 20Hz - 20kHz)
75W x 4
• Bridged into 4 Ohms: (@ 14.4V +-1%THD+N, 20Hz - 20kHz)
150W x 2

Sound Tuning
• Crossover: 50Hz-400Hz, -12dB/oct. (Low-Pass/High-Pass)
• EQ (Equalizer): Bass EQ (Fixed Frequency): 50Hz +12dB
• Subsonic Filter: 15Hz (Fixed), -18dB/oct.

Dimensions
• Foot Print (WxHxD) mm: 270mm x 60mm x 242mm
• Heat Sink (WxHxD) mm: 210mm x 60mm x 242mm

General
• Power Requirements: 14.4V DC (11V to 16V)
• Input Sensitivity: 0.2 - 4.0V
• Frequency Response: 20 -20kHz (0, -1dB)
• Speaker Impedance: 4 or 2 Ohms
• Signal to Noise: 100dBA

Features
• 2/3/4 Channel Operation • BassEngine® • Subsonic Filter • Bass EQ Circuit
• Crossover (HP/LP) • MOSFET Power Supply • DC-DC PWM Power Supply • Discrete Pre-Amp Stage • Double Buffered Pre-Amp Input Circuitry • STAR Circuitry • MultiMode™ • Top Mounted Blue LED Power/Status Indicator
• Duo B Feedback Circuitry • Continuously Adjustable Gain Control • Speaker Level Inputs • Gold Plated Power Screw Terminals

Gold Plated Speaker Terminals
• Cross-Vented Chassis Design

CEA-2006 Power Rating
• CEA-2006 Power Rating (40hm at 14.4V = 1%THD+N), S/N 60dBA (Ref. 1W into 4Ohm): 40x4

RMS Power (at 14.4V THD+N, 20Hz-200Hz)
• Per channel into 4 ohms: 40W x 4 (0.08% THD)
• Per channel into 2 ohms: 50W x 4 (0.3%)
• Bridged 4 ohms: 100W x 2 (0.3%)
• Total Max. Power: 360W

BassEngine® Sound Tuning
• Crossover Network: 18dB/oct
• Low/High Pass Crossover Frequency (Fixed): 80Hz
• Subsonic Filter (Fixed): 20Hz
• Bass EQ Frequency (Fixed): 50Hz
• Bass EQ Level (Adjustable): 0 - 12dB

General
• Power Requirements: 14.4V DC (11V to 16V)
• Frequency Response: 10Hz – 50kHz (+0, -1dB)
• Signal to Noise (S/N): 100dBA (referenced to rated power)
• Input Sensitivity (For Rated Power): 0.2V to 4.0V
• Slew Factor: Greater than 5
• Input Impedance: 10k Ohm
• Speaker Impedance: 4 or 2 Ohm (Stereo), 4 Ohm (Bridged)
• Dimensions (WxHxD): 232mm x 60mm x 267mm
• Dimensions (WxHxD): 9-1/5" x 2-2/5" x 10-1/2"
• Weight: 2.64 Kg. (5 lbs)

Features
• 1/2 Channel Operation • BassEngine® • Subsonic Filter • Bass EQ Circuit • Crossover (HP/LP) • MOSFET Power Supply • DC-DC PWM Power Supply • Discrete Pre-Amp Stage • Double Buffered Pre-Amp Input Circuitry • STAR Circuitry • MultiMode™ • Top Mounted Blue LED Power/Status Indicator • Duo B Feedback Circuitry • Continuously Adjustable Gain Control • Speaker Level Inputs • Gold Plated Power Screw Terminals • Gold Plated Speaker Terminals • Cross-Vented Chassis Design

CEA-2006 Power Rating
• CEA-2006 Power Rating (40hm at 14.4V = 1%THD+N), S/N 60dBA (Ref. 1W into 4Ohm): 50W x 2

RMS Power (at 14.4V THD+N, 20Hz-200Hz)
• Per channel into 4 ohms: 50W x 2 (0.08% THD)
• Per channel into 2 ohms: 70W x 2 (0.3%)
• Bridged 4 ohms: 140W x 1 (0.3%)
• Total Max. Power: 250W

BassEngine® Sound Tuning
• Crossover Network: 18dB/oct
• Low/High Pass Crossover Frequency (Fixed): 80Hz
• Subsonic Filter (Fixed): 20Hz
• Bass EQ Frequency (Fixed): 50Hz
• Bass EQ Level (Adjustable): 0 - 12dB

General
• Power Requirements: 14.4V DC (11V to 16V)
• Frequency Response: 10Hz – 50kHz (+0, -1dB)
• Signal to Noise (S/N): 100dBA (referenced to rated power)
• Input Sensitivity (For Rated Power): 0.2V to 4.0V
• Slew Factor: Greater than 5
• Input Impedance: 10k Ohm
• Speaker Impedance: 4 or 2 Ohm (Stereo), 4 Ohm (Bridged)
• Dimensions (WxHxD): 172mm x 60mm x 267mm
• Dimensions (WxHxD): 6-4/5” x 2-2/5" x 10-1/2”
• Weight: 1.95 Kg. (4 lbs. 5 oz)